Aetina’s “AN810-XNX” provider for the Jetson Xavier NX provides GbE, HDMI, 120-pin CSI-2, 3x USB, -20 to 70℃ help, and 3x M.2 slots.
Aetina has launched the primary provider board we’ve seen for Nvidia’s Jetson Xavier NX module that gives 3x M.2 growth slots. Licensed for Microsoft Azure IoT, the AN810-XNX is designed for robotics, drones, UAVs, industrial inspection, medical imaging, and deep studying purposes. (See farther beneath for a recap of the Linux-powered Xavier NX.)
AN810-XNX with fan-cooled Jetson Xavier NX
(click on photos to enlarge)
The AN810-XNX follows earlier Aetina Jetson carriers such because the Jetson Nano based mostly, 87.Four x 67.Four mm AN110. Though the AN110 is billed as supporting each the Nano and the NX, in June of this yr, Aetina launched an NX-specific variant known as the AN110-XNX that seems to be similar to the AN110 aside from its narrower -20 to 55℃ working vary.
AN810-XNX back and front views with NX however no fan (left) and up to date AN110-XNX
(click on photos to enlarge)
The 120 x 120mm, Nano-ITX form-factor AN810-XNX competes with Xavier NX carriers from D3, Diamond, and CTI that had been unveiled earlier this yr plus a number of carriers from Auvidea that launched just a few weeks in the past. There’s additionally Nvidia’s $399 Jetson Xavier NX Developer Equipment.
The AN810-XNX builds on the Xavier NX module’s 8GB LPDDR4 and 16GB eMMC 5.1 with a microSD slot. Additional storage is accessible by way of the M.2 M-key 2280 slot (PCIe x4/SATA), which helps Innodisk’s InnoAGE out-of-band distant administration SSD M.2 card. There are additionally M.2 E-key 2230 (USB 2.0/PCIe x1) and M.2 B-key 3050 (USB 3.1) slots and a SIM card slot.
AN810-XNX block diagram
(click on picture to enlarge)
Main ports embrace HDMI, GbE, 2x USB 3.2 Gen1, and a micro-USB 2.Zero OTG port. Aetina doesn’t element the capabilities of its 120-pin MIPI-CSI-2 interface, however it might seem like not less than as succesful because the AN110-XNX’s 15-pin 2-lane and 36-pin 4-lane CSI-2 interfaces.
Onboard I/Os embrace 2x UART, 5x GPIO, 3x I2C, and single SPI, CAN, entrance panel, and energy/reset headers. There’s additionally a header for the 12-19V DC enter. The -20 to 70℃ working vary falls in the course of the NX carriers we’ve seen up to now. A fan with heatsink is non-compulsory.
Jetson Xavier NX recap
— ADVERTISEMENT —
The Jetson Xavier NX module has a extra highly effective CPU and GPU than the 87 x 50mm Jetson TX2 whereas shrinking to the 70 x 45mm measurement of the Jetson Nano. The Xavier NX runs Ubuntu Linux on 6x ARMv8.2 Carmel CPU cores and offers graphics and AI processing on its 384-core Volta GPU, in comparison with the 512-core Volta GPU on the Jetson AGX Xavier
The Xavier NX can run at a low of 10W — twice the minimal energy consumption of the Nano. At that degree, it may possibly ship 14 TOPS neural processing energy, rising to 21 TOPS at 15W. By comparability, the bigger, octa-core AGX Xavier runs at as much as 30 TOPS. The Xavier NX has twice the RAM of the Nano with 8GB LPDDR4 and equally provides 16GB eMMC.
The AN810-XNX is accessible now at an undisclosed worth. Extra data could also be present in Aetina’s announcement and product web page
rts5489-gr datasheet,jetson nx,jetson nano,auvidea j30,auvidea gmbh,xavier nx case,auvidea jetson,auvidea drivers,auvidea j143,rudy nx,diamond systems floyd,connect tech ngx004,cogswell vision system,ngx003,connecttect