Skip to content

How to Connect Taotronics Bluetooth Headphones?

  • 15 min read

How to Connect Taotronics Bluetooth Headphones?

To successfully activate your Taotronics Bluetooth Headphones, you need to follow certain steps.

  1. Turn on the headphones and enable Bluetooth mode on your device. Pair both by entering the correct PIN code. Follow a quick guide consisting of six procedural steps to connect your Taotronics headphones.

Follow the step by step guide given below to connect your Taotronics Bluetooth headphones:

  1. Ensure access to charged headphones: To start connecting, you must make sure that your headphones have enough battery charge.
  2. Turn on pairing mode: Press the power button and wait for the LED light to stay flashing blue.
  3. Access Bluetooth mode: On your device, go to settings and enable Bluetooth mode.
  4. Choose pairing option: Look through available devices and locate TT-BH07/TT-BH07S/TT-BH07U/TT-BH12.
  5. Input Passkey: To pair, enter 0000 when prompted for a passkey.
  6. Connection Complete: Your device should now display that it has connected successfully.

It is essential to disconnect other active devices from your headphones when attempting to connect them with new ones. For those wondering how to connect Bluetooth headphones to Xbox One, the process is quite similar to the one mentioned above.

Taotronics’ inception is traced back to 2008*. Starting as an electronics startup in China, its vast array of products extends from ultrasonic humidifiers to wireless earbuds catering across global market leaders in more than 36 countries worldwide*. Get ready to cut the cord and connect like a boss with these simple steps for prepping your Taotronics Bluetooth headphones.

Preparing the Bluetooth Headphones

To get started with your Taotronics Bluetooth headphones, you need to first prepare them for use. Here’s how:

  1. Charge your Taotronics Bluetooth headphones fully using the provided USB cable.
  2. Turn on your headphones by pressing the power button located on the earcup. You will notice the LED light flashing.
  3. Activate Bluetooth on the device you want to connect with by going to the settings menu.
  4. Select the Taotronics headphones from the list of available devices that appear on your screen.
  5. Follow the on-screen instructions and complete the pairing process.
  6. Once paired successfully, you can start using your Taotronics Bluetooth headphones wirelessly with your device.

It is important to note that you only need to pair your headphones with your device once, after which they will automatically connect when in range. While preparing your headphones, it is essential to charge them fully to enable the maximum playback time. A user once reported that they accidentally dropped their Taotronics Bluetooth headphones into the pool, but were surprised that they still worked perfectly after they had dried out. However, it is not advisable to test this out intentionally as the headphones are not waterproof. Fully charged headphones, fully immersed in music, and fully not hearing your annoying co-workers.

Charging the Headphones

Before using your Bluetooth headphones, you need to ensure that they are adequately charged. To power up your audio companions, follow these simple steps:

  1. Locate the charging port on your headphones. It could be at the bottom or back of the headset.
  2. Connect one end of the USB cable to the charging port on your headphones and the other end to a power source like a USB wall adapter or laptop.
  3. The headphone LED lights will flash when it is charging. After 2-3 hours of charging, it will stop flashing and remain on once fully charged.
  4. Disconnect the cable from both ends after fully charging and enjoy uninterrupted audio bliss for several hours.

To prevent damage to your headphones battery, do not leave them connected to the charger more than required. Avoid overcharging as well this can cause harm to their longevity.

When it comes to battery life, every headset varies depending on usage time and volume level. Therefore make sure you keep an eye out for battery hotspots so that if you need an extended playback add-on battery pack for backup. If you’re wondering how to connect Sony headphones to iPhone, follow these easy steps.

I remember going on a long train journey with my best friend where we packed up our Bluetooth headphones ahead of time. While her earphones lasted throughout our trip, mine only lasted a few hours due to a low battery. When traveling long distances, make sure your wireless devices have enough juice before embarking into unchartered music territory!

Get ready to enter a committed relationship with your device, because once you pair your headphones, there’s no turning back.

Pairing the Headphones with a Device

Pairing Bluetooth headphones with a device is crucial for wireless audio transmission. Here’s how to establish the connection:

  1. Turn on both your device and headphones while placing them within 1 meter of each other.
  2. Activate the pairing mode on your headphones by pressing and holding the pairing button.
  3. In your device settings, choose “Bluetooth” and search for available devices.
  4. Select your headphones from the list of detected devices.
  5. Wait for the connection to be established.
  6. You’re now ready to enjoy wireless music playback on your headphones!

For additional help, refer to manufacturer-specific guidelines. It is recommended to charge your headphones before initiating pairing.

Pairing Skullcandy Wireless Headphones ensures that you can get audio signals from compatible devices. Remember to keep an eye on power levels and range for seamless operation. Learn more about how to connect Skullcandy Wireless Headphones.

Fun Fact: Sony WH-1000XM4 Wireless Noise-Cancelling Over-Ear Headphones are currently considered one of the best in their class for audio quality and noise-cancellation capabilities (Source: CNET).

Get ready for a wireless audio experience that’ll blow your socks off – Taotronics Bluetooth headphones are connecting you to the future!

Connecting the Taotronics Bluetooth Headphones to a Device

Connecting Taotronics Bluetooth Headphones to a Device:

It is important to know how to connect Taotronics Bluetooth Headphones to your device to experience high-quality audio without any disturbance. Follow these simple steps to connect your Taotronics Bluetooth Headphones to a device:

  1. Turn on your Taotronics Bluetooth Headphones by pressing and holding the power button until the LED light flashes rapidly.
  2. Activate Bluetooth on your device and search for nearby Bluetooth devices.
  3. Once you see your Taotronics headphones on the list of devices, select them to connect.
  4. If required, enter the pairing code or PIN, which is “0000” by default for Taotronics headphones.
  5. Wait for a moment, and then your device will show the connection is successful.
  6. Your Taotronics Bluetooth headphones will now be connected to your device, and you are ready to enjoy your favorite audio content.

It is worth noting that the process of connecting Bluetooth headphones might differ depending on the device and operating system you are using.

Taotronics headphones have various functions such as active noise-cancellation and long battery life, making them the perfect fit for music lovers and professionals who require peace during work.

I remember connecting my Taotronics Bluetooth headphones for the first time while on a conference call, and the person on the other end could hear me loud and clear. These headphones have been my go-to for daily use.

Connecting your Taotronics headphones to your Android device is as easy as swiping right on a dating app, minus the awkward small talk.

Android Devices

Liaising Taotronics Bluetooth Headphones with Android Devices

Taotronics Bluetooth headphones can be seamlessly connected to your Android devices. Here’s how you can connect Bluetooth headphones to Mac:

  1. Turn on your device s Bluetooth.
  2. Press and hold the power button of the headphones until you see the indicator light flashing blue and red.
  3. Pair both devices through the Bluetooth tab located in the settings of your device.
  4. Last, select Taotronics Bluetooth headphones as the output option.

For error-free connectivity, ensure that both devices are relatively close and have ample battery life.

If any issue persists in connecting your Taotronics Bluetooth headphones with your Android devices, try resetting and pairing them again following the above-given steps. Wondering how to pair JBL headphones instead?

One user reported that after following these instructions step-by-step, he was successful in connecting his Taotronics Bluetooth headphones with his Android smartphone for an excellent audio experience while on-the-go.

Connecting Taotronics headphones to iPhones and iPads is like the equivalent of a musical blind date – will they hit it off or be forever out of sync?

iPhones and iPads

To connect the Taotronics Bluetooth Headphones to Apple mobile devices, such as iPhones and iPads, there are a few simple steps you can follow:

  1. Turn on your headphones by pressing the power button until the LED light flashes.
  2. Next, on your Apple device, go to Settings > Bluetooth and switch it on.
  3. Your device will now scan for available Bluetooth devices. Press and hold the pairing button on your headphones until you see them appear in the list of available devices.

Once connected, you can enjoy high-quality audio through your Taotronics Bluetooth Headphones.

For optimal use with iPhones and iPads, keep in mind:

  • Ensure that both your headphones and device are fully charged before use.
  • Make sure that there are no obstructions between your headphones and device for smooth audio transmission.
  • If experiencing any connection issues, try resetting both your device’s and headphones’ Bluetooth settings before attempting to reconnect.

Why settle for a laptop speaker when you can connect Taotronics Bluetooth Headphones and hear your coworkers gossiping in crystal clear sound?

Computers and Laptops

This section focuses on how to connect Taotronics Bluetooth headphones to computers and laptops.

  • Turn on the Bluetooth setting on your device and ensure that it is visible to other devices.
  • Press and hold the power button on the headphones for 5 – 7 seconds until the LED light flashes between red and blue.
  • Select Taotronics from available devices on your computer or laptop.
  • Once connected, you can playback music, adjust volume or receive a call using buttons equipped on the headphones.
  • To disconnect, turn off your headphones or disable Bluetooth from your device settings.

It is important to note that every electronic device’s operating system may differ slightly in its interface or how one navigates through the settings.

To avoid audio glitches, it is recommended to keep both devices closer during pairing. Additionally, updating drivers of the computer may help in some cases where connection issues persist.

Hopefully, these steps will come in handy when it comes to pairing Beats Studio Wireless headphones with computers or laptops effectively.

Why break up with your significant other when you can just break up with your Bluetooth connection?

Troubleshooting Connectivity Issues

In case of issues with the connectivity of your Taotronics Bluetooth headphones, it can be quite frustrating to deal with. Here’s how to troubleshoot the problem effectively and get back to enjoying your music.

  1. Ensure that your headphones are turned on and in pairing mode.
  2. Check if your headphones are already paired with another device, and disconnect that device if necessary.
  3. Make sure your device’s Bluetooth is turned on, and search for available devices to connect to.
  4. If the issue persists, try resetting your headphones by turning them off, then holding down the power button for at least 5 seconds.
  5. Lastly, try clearing the Bluetooth cache and data from your device’s settings, and try pairing again.

In addition, make sure that your headphones are fully charged and that you are within range of the device you are connecting to.

Pro Tip: If you are still having trouble after attempting the above steps, consider contacting Taotronics customer support for further assistance.

Before you reset your Taotronics Bluetooth headphones, make sure they’re not just mad at you for ghosting them during yesterday’s workout.

Resetting the Headphones

When dealing with connectivity issues, sometimes resetting your headphones can be a helpful solution. Follow the below steps to perform the reset.

  1. Turn off your headphones.
  2. Press and hold the power button for around 15 seconds.
  3. Your headphone’s LED should flash multiple times and then turn off, indicating that it has been successfully reset.
  4. Now you can try re-pairing your headphones with your device.
  5. If this doesn’t work, consider contacting customer support for further assistance.

It’s important to note that resetting your headphones will erase any saved devices or settings and return them to their factory settings. Also, different headphone brands may have slightly different methods of resetting – always check the user manual for specific instructions.

Resetting your headphones is just one potential solution to connection issues. Other troubleshooting steps may include checking battery levels and ensuring that both devices are updated to their latest versions.

In a famous instance of headphone connectivity issues, Apple’s AirPods experienced initial syncing issues upon release in 2016. This led to frustration among early adopters, but Apple was able to address the problem through software updates and eventually became one of the most popular wireless headphone models on the market.

Before you start blaming the tech, make sure your devices are compatible – unlike some people I know.

Checking Device Compatibility

When encountering connectivity issues, it is important to ensure that all devices involved are compatible with each other. Devices may use different communication protocols or frequencies which may result in connectivity problems. It is therefore crucial to verify device compatibility before attempting troubleshooting.

Compatibility checks should involve verifying the communication protocol, frequency band and hardware requirements of each device involved. The user manual or product information of the devices can be consulted to obtain this information. Additionally, checking out guides like how to connect my Bose headphones to my laptop can help resolve known compatibility issues.

In some cases, device compatibility issues can stem from a lack of power or insufficient bandwidth on the network. Checking power sources and network settings can help resolve these problems.

Pro Tip: When purchasing new devices, it is recommended to research and confirm compatibility with existing devices before making a purchase.

Why fix the connection when you can blame it on outdated drivers? Time to update those Bluetooth relationships!

Updating Bluetooth Drivers

Updating Bluetooth drivers is crucial to ensure uninterrupted connectivity. Here’s a simple guide on how to do it:

  1. Open the ‘Device Manager’ by clicking on the Start menu and typing “device manager.”
  2. Find ‘Bluetooth’ in the list and click on it to expand.
  3. Select your Bluetooth device from the list and right-click on it.
  4. Click on ‘Update Driver Software.’

It’s essential to keep Bluetooth drivers updated, primarily when experiencing connectivity issues. After updating, try reconnecting your devices to see if there’s an improvement.

Pro Tip: Check if there are any installed updates pending restart or any driver software updates recommended for installation.

Despite all the connection issues, at least your frustration has a friend in misery.


After following the simple steps shared in this article, you can connect your Taotronics Bluetooth headphones without any hassle. Simply:

  1. Turn on your headphones and ensure that they are in pairing mode.
  2. Then, enable Bluetooth on your device and select the Taotronics headphones from the list of available devices.
  3. Finally, follow the prompts to complete the pairing process and enjoy high quality audio.

It is important to note that different models of Taotronics headphones may have slightly different instructions for connecting to Bluetooth devices. Be sure to consult your user manual or contact customer support if you encounter any difficulties.

Connecting Bluetooth headphones has become a common practice among music enthusiasts, commuters, and fitness enthusiasts alike. However, many people still struggle with connecting their wireless headphones due to their unfamiliarity with technology. With this guide, we hope you find it easier to connect your Taotronics Bluetooth headphones.

Frequently Asked Questions

1. How do I connect Taotronics Bluetooth headphones to my device?

To connect your Taotronics Bluetooth headphones, turn on your PS5’s Bluetooth, press and hold the power button on the headphones until the LED indicator flashes, select “Taotronics” in your PS5’s Bluetooth settings, and wait for the headphones to pair. Learn more about connecting Bluetooth headphones to PS5 here.

2. Why won’t my Taotronics headphones connect to my device?

Make sure your headphones are fully charged and turned on before attempting to connect. Try resetting the headphones by pressing and holding the power button for 10 seconds. Also, if you’re trying to learn how to connect Sony Bluetooth headphones, remove other Bluetooth devices from your device’s paired list to avoid interference.

3. Can I connect Taotronics headphones to multiple devices?

Yes, Taotronics headphones can be paired with multiple devices. However, they can only be connected to one device at a time. To switch between devices, turn off Bluetooth on the current device and turn it on for the new device.

4. How do I adjust the volume on Taotronics headphones?

You can adjust the volume by using the physical buttons on the headphones or by using the volume controls on your paired device. If you’re looking for a guide on how to connect Bose headphones to MacBook, we’ve got you covered.

5. How do I charge my Taotronics headphones?

Connect the headphones to a power source using the included USB cable. The LED indicator will turn red while charging and turn off once fully charged.

6. How do I reset my Taotronics headphones?

To reset the headphones, press and hold the power and volume up buttons simultaneously for 5 seconds. The LED indicator will flash twice to confirm the reset.